The Best & Fastest Family Entertainment In Central Oregon

 
MINI TRUCK RULES:
Racing Starts at 6:30 p.m.

IF IT DOES NOT SAT YOU CAN - THEN YOU CAN NOT

2400 LB weight or 1 LB per CC whichever is greater. Stock type suspension components. Weight jacks OK. No coil overs. Max 8" spoiler not to extend forward past rear of rear tire. No altered fire walls. FOUR CYLINDER ENGINE ONLY.

One two BBL carb. Stock intake. Stock exhaust, stock distributor. NO MSD or aftermarket IGN systems. No turbos, blowers, nitrous or injection. Performance cam OK. Stock or stock displacement pistons only. Stock block and heads.

Stock steel flywheel. Stock type clutch and pressure plate with scatter shield. Stock factory steel body. Radiator over flow catch bottle or tank. No antifreeze/coolant. Pump or race gas only. Fuel Cells mandatory. Must be attached with two 2" straps or 1" square tubing. No bottom feed fittings allowed. Electric fuel pump will be allowed only when using a oil pressure switch for the shut off of the pump as well as a kill switch.

Mufflers required. Noise level may not exceed 95 DBA at 100ft.,60 DBA at property line.

TIRE RULE: 11.5 or less asphalt slicks required on rears, no racing recaps, grooving allowed. 10" max wide D.O.T tries can be used on the front. Steel or aluminum racing wheels. No beadlocks.

Top five must go across the scales immediately after your main event. If you do not you will be disqualified

RACE RECIEVERS AND MYLAPS TRANSPONDERS ARE REQUIRED

Wing window bars made from roll bar material. Minimum 1 ¾" .095 wall round tubing. 3 door bars with upright bracing on driver's side. Outer door bars permitted 1" from body and bumper ends inset 2" from outside edge of tires

Bumper ends should be plated or strapped to prevent hooking. No cow catchers. Nerf bars need to be securely fastened with no sharp edges. No Protruding objects. Doors to be welded shut, all bracing to be track approved. All glass, trim, mirrors and all flammable material to be removed from the car. No radios. Windshields removed, replaced by heavy wire mesh rock guard. No open fire walls, holes to be plugged. Motors to have solid mounts or to be chained down. Cars must be self starting with battery enclosed in nonconductive box securely fastened. All cars require master disconnect switch brightly marked in open view. Stock balancers to have plate on 3/16" steel larger than outer ring or pulley bolted to balancer. Front loop required on open drive lines. Drive lines and added weight to be painted white or bright color. No loose body parts/sheet metal. Hook area to be made of chain or tow hook and must be visible to wrecker. A minimum 2 ¾ lb charged fire extinguisher on board with quick release bracket recommended.

SAFETY RULES: All cars require a 5 point SFI racing harness attached to the roll cage. Fire suits, racing gloves, racing shoes, full face shield helmet and window net 24x16 with top release welded to cage at bottom required. Head cover, neck brace and nomex underwear recommended. All helmets need to be 2009 or newer snell approved or equivalent. Blood type on helmet recommended.

IF YOU FAIL TO MEET THE SAFETY REQUIREMENTS YOU WILL NOT RACE!